Jeep GCSRT8 runs 12.12 at 112.70 mph with cam and bolt-ons
#1
Thread Starter
LS1 Tech Administrator
iTrader: (14)
Joined: Nov 2001
Posts: 8,124
From: Victoria, TX
Finally got some good weather to run the Jeep with the latest bolt-ons. With bone stock heads, Frank Racing Little Boy camshaft, FRI ported intake manifold, American Racing 1 3/4" headers with dual cats, BWoody CAI, Magnaflow catback with 3" dual resonators, my Jeep ran 5 times in the 12 teens. Here are my best two runs.


If those numbers are hard to read, the best ET was 12.1213 @ 112.70mph. 60' time was 1.6962, 1/8 mile time was 7.7140 @ 88.97mph. Weather conditions were 30.35 barometer, 48 degrees F, 29.2% humidity. Density altitude at the track was -950 according to our weather station. Gotta love how hard these heavy beasts can launch. Now if I could only get CMR for my Jeep, I might be able to better fine-tune it and reach for the 11s with stock heads!


If those numbers are hard to read, the best ET was 12.1213 @ 112.70mph. 60' time was 1.6962, 1/8 mile time was 7.7140 @ 88.97mph. Weather conditions were 30.35 barometer, 48 degrees F, 29.2% humidity. Density altitude at the track was -950 according to our weather station. Gotta love how hard these heavy beasts can launch. Now if I could only get CMR for my Jeep, I might be able to better fine-tune it and reach for the 11s with stock heads!
#3
Patrick is notorious for making things very quick
. His handprints are all over my 10 sec. Z28. His handprints are also gonna be on my Daytona. I think his convertor is stock but not 100% sure cause he is always doing something new to whatever he has
Thread
Thread Starter
Forum
Replies
Last Post
ProChargerTech
Forced Induction
0
Jul 16, 2014 10:14 AM




