ported 5.7 cylinder heads
Jul 28, 2009 | 06:34 PM
#1
Thread Starter
Teching In
Joined: Jul 2009
Posts: 15
From: Houston
ported 5.7 cylinder heads
These heads are ported and polished 5 angle valve job with new stock size valves. They have srt-8 valve springs on them the heads have been cut .015"
For a small increase in compression.
intake Exhaust
.300 217 .300 148
.400 282 .400 192
.500 298 .500 218
.600 319 .600 225
.700 324 .700 232
Heads were flowed on sf-600 @ 28" of water. Flowed at Greg Good Cylinder Heads. Heads were ported by MDinduction $1,350.00 plus cores.SOLD
Also for sale now are one set of srt-8 6.1 hemi cylinder heads. Will add flow numbers on monday. Ported and polished cut
.030" 5 angle valve job new giudes and seals. Have a new set srt-8 valve springs on them if you have your own springs I can put them on for you if you send them. And will machine valve guide for more retainer to seal clearance if you have more lift. These are ported by MDinduction Flowed at Greg Good Cylinder Heads $1,499.00 plus cores and shipping.
For a small increase in compression.
intake Exhaust
.300 217 .300 148
.400 282 .400 192
.500 298 .500 218
.600 319 .600 225
.700 324 .700 232
Heads were flowed on sf-600 @ 28" of water. Flowed at Greg Good Cylinder Heads. Heads were ported by MDinduction $1,350.00 plus cores.SOLD
Also for sale now are one set of srt-8 6.1 hemi cylinder heads. Will add flow numbers on monday. Ported and polished cut
.030" 5 angle valve job new giudes and seals. Have a new set srt-8 valve springs on them if you have your own springs I can put them on for you if you send them. And will machine valve guide for more retainer to seal clearance if you have more lift. These are ported by MDinduction Flowed at Greg Good Cylinder Heads $1,499.00 plus cores and shipping.
Last edited by matt d.; Oct 10, 2009 at 12:20 PM.
Thread
Thread Starter
Forum
Replies
Last Post
