Rating Summary #39,826

I Bought a set of heads from Eastside threw Sean and the heads were misrepresented. I was told they were milled .030. The heads were angle milled .090+ on the exhaust side and .020+ on the intake side. This made intake fitment near impossible. I had to cut plastic and brass stops on intake to make it seal. Also the 2 heads are decked different amounts. And the head is decked crooked from front to back .016. This makes the cc of the head 2 cc different from front to back. Sean keeps saying they were fine how do I know you did not do anything to them. When bought them I changed the springs and bolted them on that's it. Now I have a bent valve because there was a drastic difference in piston to valve on #1 cyl which was checked .150 intake .130 exhaust to #8 cyl which hit the exhaust valve after a high rpm pull 6600 and checked after the problem and had .080 on the exhaust I asked for a return of the head and a refund which they won't deal with us on so now I will make it be know let me know what you think.

Thanks